Industry: Manufacturing Production Press Releases

Advanced Labelworx, Inc Celebrates 44 Years of Providing Innovative Solutions

Advanced Labelworx, Inc. (ALI), a mainstay in the labeling and print industry, celebrated its 44th Anniversary in February 2015. ALI, which offers labeling solutions and comprehensive support to minimize inventories and maximize cost savings for companies across an array of industries, was formed upon the merger of Tag & Label Corporation (TLC) and Tennessee Tape & Label Corporation (TTL), both of which were founded in the late 1960s and specialized in providing technical solutions in the durable products markets.

Foamlinx and WeCutFoam Fabricating Elytron's Innovative VTOL Aircraft Prototype

Foamlinx and WeCutFoam have fabricated a prototype two-seater modern aircraft for Elytron LLC. The aircraft is unique since it combines abilities of a helicopter with characters of an airplane all in one design. It can take-off and land vertically while being fast and efficient like a plane. The aircraft was machined from high density polystyrene foam then covered with carbon fiber. It is targeted for medical emergency service, air taxi and oil exploration. Elytron will begin flight testing in summer 2015 in Northern CA.

ALT Partners With Realty Developer for Quality Lighting and Living

Other than work, the home is where most people spend most of their time. It is a place of comfort and relief, where people go back to relax and spend quality time with their loved ones. Which is why safety and the quality of materials used in building your home is so important.

Combining Access Control Biometrics Fingerprint With Smartcard Technology

The FUSION Biometrics Fingerprint PIN Reader features the highest levels of secure authentication supporting multiple factors of authentication including; Card Only; Card plus Fingerprint; Card plus PIN or; Card plus PIN and Fingerprint. On enrolment, the biometric template is stored on the smartcard in a fully encrypted AES format together with other information of the cardholder including a digital photo and access control profile.

Paragon Laboratories Once Again Earns Renewal of Certification in Good Manufacturing Practices From the Natural Products Association

Paragon Laboratories has been re-certified by the Natural Products Association (NPA) for meeting a high level of compliance with NPA's standard for Good Manufacturing Practices (GMPs) of Dietary Supplements. Paragon Laboratories is a nutritional and dietary supplement contract manufacturer specializing in the turn-key manufacture and packaging of tablets, capsules, and powders.

University of Kentucky Installs 9 New Bike Shelters and Earns LEED Credits

EdR celebrates the completion of Phase 1 of its campus-wide revitalization project at the University of Kentucky. 1,800 more beds were added to UK's dorm capacity, and 9 bike shelters were installed for residents. UK gained valuable LEED credits for investing in the covered bike parking and plans to install 8-10 additional bike shelters in Phase 2. The shelters were manufactured by Brasco International, a Detroit based designer and metal fabricator of USA made shelters and site furnishings. The shelters are Buy America compliant and meet international quality standards for wind and snow loads.

Hope Technology Develops New Range of Composite Bicycle Components Thanks to New Digital Cutting Machine

Components currently manufactured by Hope Technology at their Barnoldswick headquarters in Lancashire are predominantly precision CNC machined from aerospace grade alloys. In recent years, however, the bicycle industry has followed the aerospace and automotive industries in adopting modern composite materials such as carbon fibre in the development of top of the range machines for bicycles serving both the competition and leisure markets.

Cosmo Films to Showcase Its Vast Label Portfolio at Labelexpo Americas

Cosmo Films, one of the leading names in BOPP films will be displaying its extensive label portfolio at Labelexpo Americas again this year. The premier trade show for packaging and labeling industry in North America will be held between Sep 9 - 11 at Donald E. Stephens Convention Center in Rosemont, Illinois.

New - ALTLED IP65 Waterproof T8

The ALTLED IP65 Waterproof T8 tube is high-quality, durable and especially good for bright and evenly spread illumination. With IP65, the LED T8 tubes may be applied without extra waterproof lighting fixture.

Website Showcases 30+ Years of Machine Tool Making Expertise

The new owners of Nicholas Machine, LLC today announced the re-launch of the company's website at

Eldon Helps Van Den Heuvel Technology Deliver Exceptionally Clean Environments to European Customers

Van den Heuvel partners with Eldon to supply bespoke stainless steel enclosures which help deliver a perfectly clean and hygienic environment. The Dutch company contributes environmentally friendly, economical and endurable sterilizing solutions to customers across Europe.

South Jersey Engineering and Research Seeks Crowdfunding Support for Production of Revolutionary Spirometer

South Jersey Engineering and Research, a start-up high tech consumer product development firm based in Avalon, New Jersey, is launching an Indiegogo crowdfunding campaign starting June 23, 2014 to support the production of their Android & iOS, smartphone enabled, portable spirometer. Lead by founders, Jonathan Frey and Blaise Menzoni, South Jersey Engineering and Research has invented the world's first truly portable, ultra low-cost, smartphone enabled incentive spirometer, the SandPiper I.

ALTLED at the 23rd Opto Taiwan 2014

ALTLED is internationally well-known for their high-quality LED products. This June 17-19, ALT will shine in their own nation at the 23rd International Optoelectronics Exposition, showcasing numerous new products.

ASB's Newly Modernized Mesta Roll Grinder Delivers Superior Performance

ASB Industries has completed the modernization of their Mesta roll grinder, one of the company's key pieces of equipment for over three decades. The new upgrades allow ASB to provide extremely accurate two axis grinding for complex roll crowns, incorporating a wide range of other thermal spray surfacing options.

Cosmo Films Strengthens Its Exports With a New SEZ Plant

The third Indian manufacturing location set up by Cosmo Films at Shendra, Aurangabad last year is fully operational now and working to its capacity to meet the growing export and international operations demands; originating largely from Europe, Japan and Americas. The $45 million Shendra plant, which is dedicated to handle the export requirements of the company, is located in the Special Economic Zone (SEZ), close to Aurangabad, approx.

HDPE Pipes and Fittings

HDPE stands for high- density polyethylene which is derived from petroleum. HDPE pipes and fitting are not just long lasting and tough but they are also strong which makes them perfect for many application.

World Roofing

Bharatbook.com announces a new report on "World Roofing". It presents historical demand data for 2003, 2008 and 2013, plus forecasts for 2018 and 2023 by roofing type, world region, and for 18 countries.

Shop-Floor Software for Industry 4 Launched by Forcam at Hanover Trade Fair

Forcam, developers of Factory Framework, the shop-floor productivity software that has boosted output by 25 percent for leading international auto manufacturers, launched Release 5, at the 2014 Hanover trade show. This latest innovation embraces big data, using complex event processing, in-memory technology and the power of the cloud to gather and process information in real-time to accelerate shop-floor performance.

NJMEP Announces John W. Kennedy As New CEO

The New Jersey Manufacturing Extension Program, Inc. (NJMEP) announces John W. Kennedy, Ph.D. as its new CEO. Kennedy previously served as the organization's COO and has more than two decades of experience in the manufacturing and engineering arenas.

Kishan Exports Announces Its Launch in 2014

Kishan Exports is a Mineral Industry based on the manufacture, supply and distribution of minerals to prospective clients in India. All prepared for its launch in the first half of 2014.

Paradise Galleries Is Looking for the Most Beautiful Baby Again!

California-based designer, developer, and marketer of award-winning dolls and toys, Paradise Galleries announces they are hosting their 2nd "Beautiful Baby Contest". Anyone can enter the their beautiful baby between 3 and 18 months to along with 250 words or less saying what makes them the most beautiful baby by February 16, 2014.