Roof Insualtion In Perth

Perth, Australia (PressExposure) September 22, 2009 -- As a member of TIAA (Thermal Insulation Association of Australia) Perth insulation is nationally recognized for its products for roof insulation in Perth.

After intensive research on various roof insulation materials, roof insulation Perth decided to develop the roof pack roofing insulation due to the products excellent properties.

Our roof insulation material has set the benchmark by combining these distinctive attributes:

• Reflectivity - The aluminum foil layer reflects 93% of the thermal heat • Conductivity - The thick polyester layer stops the direct transfer of heat through the material. A top quality virgin hollow fiber. • Convection - The white solid underside stops the movement of heated air stopping the convection loop. The plastic side also provides a much needed vapor barrier.

The insulation material consists of a 75mm thick, lightweight, compressible insulation material manufactured from thermally bonded polyester laminated on aluminum foil and is an ideal roof insulation product.

The aluminum foil reflects 93% of the heat while the insulation material absorbs the rest. It will provide thermal and acoustic insulation. This product is ideal for use in both walls and ceilings and will effectively reduce energy cost.

Please Note: Your air conditioner will be more effectively used in conjunction with roof insulation in Perth, saving you costs on your electricity bill.

Technical Data The following results have been achieved during testing by the SABS and Fire Lab of the Perth’s Roof Pack Insulation: Testing Results Moisture Absorption SABS 1381-1:1989 No Moisture Absorption Handling Properties SABA 1381-1:1989 Malt did not tear R-Value SABS 1381-1:1989 1,1 Resistance to Fungal Attack SABS 1381-1:1989 Did not support growth Freedom from Objectionable Odors SDABS 1381-1:1989 No odors Fire Properties using "Channel Tunnel" for the Evaluation of Fire Spread Class B/B1 Roof insulation in Perth just deformed and melted away with no ignition of material noted. Accept when non-consumable materials are required (SAMS 10400-T) It is acceptable for domestic use. SABS certificates can be downloaded from the web site ([http://www.perth-insulation.com/])

Product Size • Size 1.2m x 10m x 50mm roll (covers 12m2) • Size: 1.2m x 10m x 75mm roll (covers 12m2) - Standard Roll • Size: 1.2m x 6m x100mm ( covers 7.2m2)

For more information, please click Roof Insulation Perth If you have a comment, please Contact us.

About indiainfotech

[http://www.perth-insulation.com/]

Press Release Source: http://PressExposure.com/PR/indiainfotech.html

Press Release Submitted On: September 21, 2009 at 1:30 am
This article has been viewed 9845 time(s).