Selective Laser Sintering and SLS Information

Seattle, Washington (PressExposure) July 13, 2008 -- The Selective Laser Sintering is a new webpage that was just added to the new SLS Information Website that has just been released. This new Selective Laser Sintering Process webpage has all of the information you need to know on 3D Systems and SLS Methods and the main information you need to know on Selective Laser Sintering. You can visit this Selective Laser Sintering webpage at: http://www.prototypezone.com/selective-laser-sintering/.

Here is an excerpt from the new Selective Laser Sintering and SLS Methods webpage:

“Stereolithography V/S Selective Laser Sintering: One of the foremost benefits of Selective Laser Sintering over Stereolithography is that it constructs prototypes in powered materials such as nylon etc. It is likely to create structurally useful parts like functioning springs, living hinges and snap fit components along with nylon substances by utilizing Selective Laser Sintering. This procedure is actually very easy as there is no need of tooling or molding involved. The nylon substance utilized in SLS can easily be tapped, drilled and machined similar to those utilized in Stereolithography or SLA. These substances are fragile as they are curved with Ultra Violet light and created with liquid photopolymers.

Since it has been introduced by DR Carl Deckard in the year 1989, this SLS technology has become one of the most recognized and utilized procedures for product development and rapid prototyping in most of the manufacturing industries. SLS technology has also become one of the most trusted and reliable forms of rapid prototyping due to its structural importance.”

The new Selective Laser Sintering Rapid Prototype page is free information to members and non-members and can be found at: http://www.prototypezone.com/. However, users of Prototype Zone who decide to be members can join for free and receive two free E-Books on Rapid Prototyping for a limited time offer. Prototype Zone will be adding new information all the time on Rapid Prototyping so check back often in the forum and blog for the latest information at: http://www.prototypezone.com/prototype-forum/selective-laser-sintering/showcat

About Prototype Zone: Prototype Zone is the leading information source and community website for all things about Prototyping and Rapid Prototyping. Visit the website to join for free and receive two free ebooks on Rapid Prototyping for a limited time offer.

About Prototype Zone

Author: Ryan Rounder, Director of PR
Email: Pressreleases@prototypezone.com
Website URL: http://www.prototypezone.com
Phone: 425-503-8401
City/State: Seattle, Washington

Press Release Source: http://PressExposure.com/PR/Prototype_Zone.html

Press Release Submitted On: July 11, 2008 at 11:13 pm
This article has been viewed 7814 time(s).